How to Find a lost Walkie Talkie?

“Can you hear me over?” “Yes, I can hear you. Over!” 

Did you ever experience pleasure in communicating? Then, have you discovered the fun and excitement by simply clicking the buttons and saying, “Copy, over.”?

A walkie talkie is a handheld portable radio device used for communication. This device uses radio waves to communicate wirelessly on a shared frequency line equipped with an antenna in receiving signals, a loudspeaker, and a microphone.

Usually, the military bases and other groups use the walkie talkie to relay messages in tune with the same frequency line. During the communication process, the messages are converted into radio waves and transmitted through the prearranged channel. At times, a lost walkie talkie can cause a disturbance during tactical operations.

Walkie talkies are relatively small, weighing about 2 ½ pounds, so the issues of looking for a lost device will be challenging. First, use the receiver with a directional tool to know the location of the other end. Second, the existence of two receivers with directional antennas can locate the device by triangulation.

Of course, there are different scenarios where one can use the techniques mentioned earlier. Moreover, you can also calculate a person’s location on the map using a directional antenna to measure the signal’s time of distance, flight, and heading.

Also, identifying a person’s location with a walkie talkie is relatively easy by making the antenna directional. Foxhunt is director finding software equipped with a fully-functional antenna capable of locating someone’s location.

Moreover, the receiving stations record the signals. Thus, marking all positions in a map helps in securing accuracy and flexibility during operations.

Specifically, a lost walkie talkie means that whoever owns it is also out of reach. Furthermore, the GPS and location provided by the phone’s cellular network may not be helpful during times of war and intensive training. So, explained below are the details and a quick run-over on how to find a lost walkie talkie.


Locate the Direction of the Walkie Talkie

Radiolocation methods have two types of techniques used to locate the walkie talkie’s direction and position—first, Trilateration, which uses multiple omnidirectional receivers positioned on the different stations. Second is triangulation, which uses single or more receiving stations.



  • Trilateration determines a moving car and a stationed object’s location using the various scopes between the vehicle point and the scattered stations.
  • Geometrically, this technique determines the exact location of points by measuring the distances through the geometry of circles, spheres, and triangles.
  • This method measures the duration of time the signal occupies until it reaches the desired position. Moreover, the estimated flights are all recorded on different receivers surrounding the area.
  • Signal detection on the other receiving stations embarks the start of calculating the lost walkie talkie’s location.
  • Having a multi omnidirectional antenna is advantageous, especially in receiving signals from all directions. Moreover, these antennas provide the exact location of the lost device.
  • However, the station’s specified location and the precise clock’s availability are necessary to give the transmitter’s accurate position.
  • Trilateration is an often preferred method because it is practical and provides accurate control expansions.



  • Triangulation determines a location by forming triangles from the known points. Specifically, it uses both the angles and the distances measured in choosing a site.
  • This method is a flexible technique where one can use multiple omnidirectional receivers or a single mobile receiving station. Triangulation is merely locating the bearing of the device’s location within the parameters of the station.
  • The receiving station has a directional antenna that receives the signal strength and determines the signal’s angle. After knowing the bearings, the estimation of the transmitter’s location is possible.
  • An advantage of using this method is that a single receiving station can be placed in different areas to provide the bearings transmitted by the device.
  • Moreover, this method does not use clocks for accuracy. So, the signal can detect the exact angle and position. Also, measurement and bearings are based on the magnetic north.
  • When using the Triangulation method, the operator must select three or more ideal locations to place the directional antennas.
  • Furthermore, a precise plotting of the bearings is vital in determining the accurate location, ensuring that the transmitter is within the stations’ premises.
  • Also, Triangulation validates a particular location by doing a series of verification processes proving the location’s accuracy.


Calculate the exact Position of a Walkie Talkie on a Map

Maps play a crucial role in determining and specifying a person’s location, place, or device. Two-dimensional maps plot the points on a Cartesian plane. Thus, a geographical map uses points plotted on a valve measured from the polar axis.

If a person uses a walkie talkie, the station’s receivers can estimate the transmitter’s location by the received signals. The angle, location, and points are usually plotted on a map to locate the device’s position accurately.

Specification about the exact labels and location is on the map, so a lost transmitter can be detected easily provided that it is within the parameter.

Also, map tracking and plotting can help in finding the exact location and makes navigation processes easier.


Conclusion – How to find a lost Walkie Talkie?

Surprisingly, the techniques mentioned above and methods can help in searching for a lost transmitter. At the same time, the processes are easy, ensuring that all equipment is available.

Walkie talkies are handy, but trouble comes when it is M-I-A during an important task. In case of emergencies, walkie talkie plays a vital role in message transmission and task distribution. It means a cut-off signal imposes possible danger to the user. So, a user should avoid signal interference and disruptions to avoid losing contact.

Also, walkie talkies are tools used to alert cautions and possible bumps ahead. So, if one loses contact with the other user, then the immediate execution of one of the methods explained above can greatly help.

Having the adequate knowledge in finding someone by tracking their walkie talkie can save lives and even solve issues ahead of time. So the next time you’re part of a rescue mission, bring out this article and put your knowledge into good use.



Founder of & Tech enthusiast. Interested in gaming, computers, and walkie-talkies.

Leave a Comment